The ZCELL LED is Lucy Zodion’s premium NEMA photocell (PECU). It has design features optimized for the latest generation of LED street lanterns. offering 15 years of continuous operation so that it could last as much as the LED street lighting fitting will do.
Long-life automotive grade components, offering 15 years continuous operation Unique electronic design to provide ultra-low power consumption of less than 100mW Zero maintenance, IP66 to reflect the design of LED lanterns Low illuminance level accurate switching – 20 lux on, 20 lux off – to indicate ‘zero’ warm-up time and immunity to switching of LEDs High-temperature operation due to lantern body acting as a heat sink for the LEDs (at night) with a solar gain by day Microprocessor controller that provides regular internal diagnostic checking and corrective actions Surge Suppression Intrinsically protected Fixing (where applicable hole dimensions) NEMA 35 Lux (on 35/ off 18) Yes 20 Lux (on 20/ off 20) Yes 10 Lux (on 10/ off 10) Yes Switching ratio 1:1 or 1:0.5 Capable of unity or negative ratio yes Maximum total load for discharge lighting (eg: HPS, MH) (Watts) 400 Maximum total load for LED lighting (watts) 200 Switching delay in seconds 10 Switching delay configurable yes Polycarbonate Enclosure (UV stabilised) Yes Consumption in watts .0.9) UMSUG Charge CODE 94 0000 0001 100 Sensor Type Filtered photodiode Sensor Drift Negligible Max operating ambient temp range -20/+80 IP Rating (installed) IP66 voltage 198-264 frequency 50Hz Electromagnetic Relay yes Location method 3 or 5/7 pin socket
rubust photocell solutionVery robust photocell working fine in GCC weather conditions, performance is accurate, and the IP rating is IP66 and working fine, which was a concern with many other brands.